Quick Start Guide for the Vortex Rotary Axis

This video is a definitive guide on how to set up your Vortex Rotary Axis for carving. You will see us set some zeroes, explore the various work-holding options, and make some beautifully round stock and the whole works, so sit back and enjoy the show!

Chapters

0:00 Introduction
0:27 Quick note on gSender
1:07 Switching to the Vortex
4:32 Homing on the Vortex
5:15 Workholding
7:57 Using the Tailstock
9:03 Setting your zero
11:03 Rotary surfacing
14:50 Bonus - Using Holding Current
16:11 VCarve Post Processor
17:45 VCarve Job Setup
18:31 Outro

Post Processor Download/Installation Instructions
https://resources.sienci.com/view/vx-...

gSender Edge V1.3.4 Download: https://github.com/Sienci-Labs/gsende...

For written instructions, visit our Vortex unboxing/assembly page: https://resources.sienci.com/view/vx-...

Order your Vortex Rotary Axis here:
https://sienci.com/product/vortex-rot...

We're here to assist you every step of the way during your Vortex assembly. Should you encounter any specific challenges, please don't hesitate to share them with us. Your feedback is invaluable as we continually strive to enhance the assembly process and ensure your experience is nothing short of exceptional.


▸RESOURCES

JOIN US
▸ Sienci Community | https://forum.sienci.com/
▸ Facebook Group |   / mill.one  
▸ Instagram |   / siencilabs  

Hashtags:
#siencilabs #longmill #vortex #vortexrotaryaxis #rotaryaxis #4thaxis #cnc #milling #quickstartguide #guide