DIY DT-12 Heavy Blaster Pistol (Greedo's Battlefront Version)

DT-12 components
KJ Works MK1 airsoft pistol https://amzn.to/2UF1Vee
Metal coat hanger (w/ appx 3mm diameter)
PL-259 UG-175 reducers x 2 (optional) https://amzn.to/2D8mHvB
3D printed accessories: https://www.thingiverse.com/thing:339...

If you do not have access to a 3D printer, check out these pieces: https://bit.ly/2PwheXs (NOTE:, using the shapeways parts may require different procedures to attach and assemble the DT-12)

Adhesives used:
E6000 https://amzn.to/2WDOXiB
SCIGrip #16 https://amzn.to/2MOGQv1

Tools used:
Flathead screwdriver
1.5mm hex key
200-400 grit sandpaper
Dremel rotary tool (optional) https://amzn.to/2UBlJ23

Surface prep and paints:
Bondo Glazing and Spot Putty https://amzn.to/2HO3JzV
Krylon Auto Filler Primer
Rustoleum Espresso in Satin finish
Krylon flat black
Krylon gloss black
Krylon metallic dark metal
Krylon flat clear
Acrylic black
Alclad II Chrome (if using an airbrush) or other metallic silver spray paint
Testors enamels in silver and bronze

Greedo’s DT-12 holster: http://tidd.ly/44c07f4e