Скачать или смотреть Installation for 7" round CREE headlights with Halo DRL and amber turn signals

This is my first ever video posted on you tube. In the beginning you'll see when I go over what you will need and state that you need a set of crimpers and I point at the wire splitters. Lol. Rookie mistake.
I got pulled off a couple times during installing the lights and had to come back to the video.
But all in all these headlights were really simple to install even for someone not very mechanically inclined. I would definitely recommend anyone to try a set out.
Should only take you about 25 minutes to install them.
Tools required for headlights:
1. Set of Crimpers if using connectors or splice kits to hook up the DRL and turn signals.
2. Wire splicers
3. black electrical tape
4. zip ties(optional) if you want to place around the aftermarket plug that plugs into factory harness. To make sure that the connectors don't start to come out from one another.
5. 15mm torx bit
6. Flat screwdriver (to pop fasteners out of the top of your grill)