How to Replace Engine Knock Sensor 2007-2013 Chevrolet Silverado 1500

Buy Now!
New Engine Knock Sensor from 1AAuto.com https://trq.video/ia-1AEKS00058

This video shows you how to install a new knock sensor in your 2007-2013 Chevrolet Silverado 1500. A knock sensor monitors your vehicle’s engine for unusual pulsations caused by things such as engine knock. If a sensor is damaged or malfunctioning, the engine may run poorly, inefficiently, or only in a low speed safe mode, and may also trigger diagnostic codes.

This repair was done on a 2009 Chevrolet Silverado 1500 LTZ 5.3L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500

Tools you will need:
• 13mm Wrench https://trq.video/oS6-1AXAA00010
• 13mm Socket https://trq.video/obmu-1AXAA00015
• Ratchet https://trq.video/obu2-1AXAA00016
• Socket Extensions https://trq.video/obmu-1AXAA00015
• Torque Wrench https://trq.video/oayJ-1AXAA00044

Subscribe:    / @trq  

Check out our playlist:
Chevy Silverado 2nd Generation 2007-2014:    • Chevy Silverado 2nd Generation 2007-2014  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.