How To Install A Tent Wood Burning Stove Flashing Kit Jack | Boutique Camping

If you're looking to heat up or cook inside of your canvas or breathable fabric tent, it's important to have a correctly installed hole to vent the flue pipe safely.
Boutique Camping have created a step-by-step tutorial guide to help you with this process. This task is done best with two people and takes even novice campers approximately 25 minutes to do.

0:00 Start
0:03 With. your stove laid flat, fold out the legs and lock into place
0:10 Stand your stove upright & position it 60cm away from fabric
0:20 Mounting the flue (chimney)
0:28 Dismantle flashing kit/Jack
0:32 Position metal ring and mark your fabric
0:43 Cutting the smaller screw holes
0:49 Hold rings back up to fabric and attach
0:58 Screw external parts into place
1:06 Cutting away the internal fabric for flue fitting
1:23 Remove flashing kit and join together with the rubber gasket
1:29 Position back into place and screw tightly to attach your flashing kit
1:43 Internally, push the flue through the gasket
1:59 Mount together the external flue parts and position on to protruding part
2:23 Tips & Tricks

Click the link below to shop the flashing kit used in this tutorial.
https://www.boutiquecamping.com/glamp...
Follow the link below to shop our full range of Portable Wood Burning Stoves and accessories.
https://www.boutiquecamping.com/glamp...
If you enjoy using your stove outside of your tent, it is important you have a water tight Bung, to place in the hole when not in use.
https://www.boutiquecamping.com/glamp...
Please ensure when in use, your stove is pitched on top of a Heat Proof Mat.
https://www.boutiquecamping.com/glamp...