Скачать или смотреть DIY Ambulance Conversion: Cutting Openings for Windows

Cutting openings for the Arctic Tern windows was an exercise in precision and patience! These windows are essential for natural light, ventilation, and that coveted feeling of openness in our home on wheels.

1. Planning and Template Creation:
We start by meticulously planning the window placement. Inside the ambulance, we used a template to mark the opening and frame around it. This template serves as our guide for the entire process.
Precise marking of the inside ensures accuracy and consistency. We take measurements and double-check our design to avoid any surprises later.

2. Pilot Holes and Exterior Matching:
We then drill pilot holes from the inside. These holes act as reference points for the exterior cut.
Moving outside, we align the template with the pilot holes. It’s crucial to get this alignment spot-on, as any deviation will affect the final fit of the window.

3. Jigsaw Magic:
Armed with a jigsaw, we carefully cut along the template lines. The jigsaw’s blade allows for precision, but we maintain a steady hand and take our time.
The hum of the jigsaw is both nerve-wracking and exciting—it’s the sound of transformation!

4. Finishing Touches: Filing and Sanding:
Once the opening is complete, we smooth out the edges using files and sandpaper. This step ensures a snug fit for the Arctic Tern window.
A tight seal is essential to keep out drafts, rain, and dust. We don’t rush this part; patience pays off.

5. One Shot at Perfection:
Remember, you can only cut once! We emphasize precision and attention to detail throughout the process.
The adrenaline rush as the window drops into place is unmatched. It’s a milestone in our conversion journey.

6. Challenges and Apologies:
Working under a tarp due to bad weather isn’t ideal, but it’s part of the adventure. Apologies for the less-than-ideal lighting—we promise better visuals next time!

Join us as we transform our ambulance into a cozy, functional home. Hit that subscribe button and stay tuned for more DIY conversion updates!


Note: Safety first! Always wear appropriate protective gear when handling tools and cutting materials. 🛠️🚐💡


00:00 Intro
01:44 Template Outside
02:37 Tracing Template
02:45 Tapping
03:20 Cutting
04:45 Window Opening
05:07 Fitting
05:17 Prep 2nd window
05:14 Sanding edges
06:25 Inside view
06:40 Insulating frames
07:04 Next step


#newyoutuber #canada #diycamper