EP. 15 My BMW E30 Restoration - Complete Fuel System Restoration and Installation

Hi and welcome to my channel.
In this video I go through all the steps of the fuel system restoration, including the tank, hardware, fuel lines and vapour tank piping modifications.
With the underside repairs now complete, I am able to start installing all the components back onto the car to get it back onto it's wheels, first up in the fuel system.
The tank was in good condition but the usual areas of rust around the seams, these were converted and some areas removed to stop the rust reappearing. The vapour system hs been modified due to me removing the carbon canister from the engine bay, but the port still required a vent so I added a crank case breather straight onto the tank for it to vent out inside the wheel well.

Time Codes:
0:00 - Intro
0:43 - Stripping the tank and inspection of rust
1:55 - Rust converting and removal of affected areas
3:00 - Tank cleaning and prepping for paint
3:46 - Primer and paint application
5:38 - Vapour tank vent modification and installation
7:47 - Fuel and brake line installation
9:00 - Installing the new tank hardware
9:57 - Tank installation
10:45 - Outro

Parts used:
DINITROL Converust RC 800
POR15 Gloss Black
MIPA EP-Grundierfiller EPOXY PRIMER 2k: https://www.ebay.co.uk/itm/174306755267
Scotch Pads - https://www.ebay.co.uk/itm/183377550658
14mm I.D (9/16) x 2000mm Cotton Over Braided Nitrile Fuel Hose
6mm I.D (1/4) x 1000mm Cotton Over Braided Nitrile Fuel Hose
8mm I.D (5/16) x 1000mm Cotton Over Braided Nitrile Fuel Hose
Bosch 0 450 905 030 Fuel Filter
9mm Inlet Breather Fuel Filter https://www.ebay.co.uk/itm/352184107021
BMW Fuel Feed Line - 16121179681
BMW Fuel Return Line - 16121179682
Fuel Line Holders - 16121155064
Fuel Line Clamp - 1612117705
90 deg Fuel Hose - 16121180399
Fuel Tank Protection Plates - 16111179429 & 16111180292
Vent Pipe Cover - 16131179011