Скачать или смотреть Custom CNC Neck Build

Custom CNC neck Part 1

00:00 - Intro - too many steps
00:24 - Walnut neck
1:30 - Stewmac vs Philadephia Luthier tools truss rods
3:00 - Milling top neck
3:46 - Milling explanation
5:25 - Dowels
7:46 - Angled headstock explanation
8:33 - Headstock design
12:11 - Carbon fiber rod install
14:42 - Angled headstock and volute milling
16:22 Show and tell
18:53 CNC finishing passes

Stew Mac Hot Rod Low-profile 2-Way Truss Rod
https://www.stewmac.com/luthier-tools...

Philadelphia Luthier Tool 2-Way Truss rod:
https://www.philadelphialuthiertools....

Carbon fiber rods
https://www.philadelphialuthiertools....

Thanks for watching. Take it easy.

End mill affiliate links:
It doesn’t cost you anything extra to support the channel.
46348-K for all pockets, cavities and rough passes - https://shrsl.com/2x720
46577-K for contour - https://shrsl.com/2x721
46299 for those hard to reach spots and the string through holes - https://shrsl.com/2x725
46294-K for ball end finishing passes - https://shrsl.com/2x729
46009-K SC for screw holes - plunging - https://shrsl.com/2x9qz
.5mm or .6mm cheap bits for fret slots - https://amzn.to/2JRAttp
51629-K SC Fancy bit for fret slots - https://shrsl.com/2x9r5

#cnc #carbide3d #shapeoko
All Music Composed by Mark Gutierrez