Angelica earrings tutorial.

Hello and welcome to my latest tutorial.

To make these earrings you will need -
• 0.8mm wire (20g), 6 x 10" (25.5cm)
• 0.3mm weaving wire (28g) 200cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer)
• Round cabochon x 2, mine are 12mm (you can use a different size, just remember to adjust wire length and weave repeats accordingly)
• Small beads, 2 x 4mm, 2 x 3mm (again you can use any size you like)
• Jump rings, 2 x 8mm (outside measurement) or whatever size you have handy
• 2 x ear wires

I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short, round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Occasionally I use beadsmith bail pliers
• Bobeeze bobbins (medium size with no extra weights)

How I oxidize my bare copper -    • Oxidising copper jewellery and after ...  
Facebook -   / kellyjoneswirejewellery  
IG jones_kel
My Etsy store - (where you can see my tutorials and jewellery for sale)
https://www.kellyjonesjewellery.etsy.com

Thanks for watching x