Part 2 Install of Scopema RIB Altair seat bed in Sprinter van - Drill holes and make backing plates

In part 2 of the Scopema RIB Altair seat bed install series I show how we located through hole positions, drilled holes, and fabricated steel backing plates.

Disclaimer: This video shows how we installed the Scopema RIB Altair seat bed in our Sprinter van. We hope this video provides some ideas for others considering a DIY installation. However anyone attempting this install on their own should consult with a professional to ensure their installation is done safely.

Products used:
Seat bed: https://scopema.com/en/banquette/alta...
T square: https://amzn.to/3Cgwts7
Step bit: https://amzn.to/3ndtWdS
Flat bar steel: https://ebay.us/IukTOL
Saw blade: https://amzn.to/30wSeHr
Primer: https://amzn.to/3DhIA9s
Paint: https://amzn.to/3wK0yyY
Bolts: https://amzn.to/3GaKLN3
Nuts: https://amzn.to/3wY5yAp

If you found this video useful consider donating to our channel at https://paypal.me/dadsvan

Find more great Sprinter DIY info, product reviews, parts, and our travel blog on our website https://dadsvan.com

#dadsvan
#vanlife
#vanconversion

00:00 Start
00:16 Introduction
01:07 Placement considerations
04:32 Clearing the B pillar
05:43 Avoiding wall contact
06:28 Clearing platform bed
08:47 Seat belt considerations
10:24 Mark and test drill
17:48 Drill final holes
21:31 Make support plates
27:53 Prime and paint plates

#CommissionsEarned
As an Amazon Associate and Ebay Partner I earn from qualifying purchases. It does not cost you anything more to use the product links, but I earn a small commission for directing traffic to amazon. Thanks for supporting our videos!

Music by: https://bensound.com