Nissan Navara D40 - SCV replacement and ECU reset

Replacing the suction control valve (SCV) on my 2007 Nissan Navara (YD25DDTi) and reseting the engine control unit (ECU)

Possible faulty SCV symptoms:
1. Intermittent injector rattle usually at around 2000 rpm
2. Stalling on idle
3. Jerking / loss of power
4. DPF light coming on
5. Cruise control failing to maintain constant speed

Notes:
Replacement can be done from above thru the engine bay but you'll mostly be doing it blind. It's recommended to move the oil dipstick out of the way when done this way.
The electrical connector can be tight and hard to grip. Do NOT pull from the wires, that's literally illegal.
Do NOT let dirt get into the fuel pump.
Make sure the new SCV seats properly. Do not force it or you'll pinch the o-ring. It sits snug but not tight.

ECU reset:
Ignition on, wait 3 seconds
Pump accelerator 5 times, wait 7 seconds
Hold accelerator for 10 seconds
Check engine light should start flashing, wait about a minute
Turn the ignition off
Start the engine

(The "beep" heard on the video during the reset is not related to the procedure, it's coming from my dashcam)