Realme Pad Mini Screen Replacement|| How To Change Realme Pad Mini Display

Realme Pad Mini Screen Replacement|| How To Change Realme Pad Mini Display
#realme
#realmetablet
#restoration

Replacing the screen on your Realme Pad Mini can be a daunting task, but it is possible to do it yourself if you have the necessary tools and knowledge. Here are the steps you can follow to change the screen on your Realme Pad Mini:

Turn off the device and disconnect any cables or chargers.

Use a heat gun or a hair dryer to heat up the edges of the screen. This will soften the adhesive and make it easier to remove the screen.

Use a plastic pry tool or a guitar pick to carefully pry the screen away from the body of the device. Start from one corner and work your way around the edges of the screen. Be careful not to damage the frame or any of the internal components.

Once the screen is detached from the body, disconnect the ribbon cables that connect the screen to the motherboard. You may need to use a spudger or tweezers to gently lift up the connectors.

Remove the old screen and replace it with the new one. Make sure the new screen is aligned properly and the ribbon cables are connected securely.

Apply adhesive to the edges of the new screen and carefully press it down onto the body of the device. Use a clamp or a heavy book to keep the screen in place while the adhesive sets.

Reconnect any cables or chargers and turn on the device. Test the new screen to make sure it is working properly.

It is important to note that screen replacement requires careful handling and attention to detail. If you are unsure about any of these steps or do not have the necessary tools, it is recommended to seek professional assistance or visit an authorized service center