There are mass flowmeters and electromagnetic flowmeters available. For the dishwashing liquid and laundry detergent, it is conductive and electromagnetic flowmeters would be suitable. If the filling material is not conductive, choose mass flowmeters.
1. The measurement accuracy is not affected by changes in fluid density, viscosity, temperature, pressure and conductivity. The sensor induced voltage signal has a linear relationship with the average flow velocity, so the measurement accuracy is high.
2. The range of the electromagnetic flowmeter is wide (maximum flow / minimum flow).
3. In addition to measuring the volume flow of general conductive liquids, electromagnetic flowmeters can also be used to measure strong corrosive liquids such as strong acids and alkalis, mud, pulp and pulp.
4. Two-way measurement system, which can measure forward flow and reverse flow.
5. Electromagnetic flowmeter has reliable performance, high precision, low power consumption, stable zero point and convenient parameter setting. Click on the Chinese display LCD to display cumulative flow, instantaneous flow, flow rate, flow percentage, and more.
Storage tank
The tank is composed of the material box, the feeding pipe, the cleaning pipe, cleaning ball, the liquid level detecting component, the pressurized air hole and the mechanical safety valve. The combination of the action of the pneumatic seat valve and the pneumatic butterfly valve on the feed pipe switches the movement direction of the fluid to realize the conversion between the feed of the tank and the CIP cleaning.
The liquid level sensing element uses a guided wave radar with continuous level detection(the level sensor will be chosen based on the filling material). The feeding of the tank is carried out according to the liquid level detection feedback signal. When the liquid level is at the set low level, the butterfly valve is opened and the feeding is started. When the high level is set, the butterfly valve closes and the feed is stopped. The pressure tank is mechanically protected by a safety valve. When the internal pressure of the tank is too high, the safety valve opens and relieves pressure.
Filling nozzle
The filling nozzle design will be based on the speed requirement and filling material physicochemical characteristics. When changing different products for production, the parameters can be adjusted on the touch screen without manual switching.
Feeding hose
Huituo linear flowmeter filling machine chooses Italian imported brand conveying pipe, which conforms to food grade, smooth EPDM rubber, abrasion resistance, ozone resistance and aging resistance, and is sterilized at 110 degrees for 30 minutes.
Servo dive
The servo motor drives the submerged filling mode of the filling nozzle. It runs smoothly, has low noise, is continuously adjustable, and is equipped with a limit switch. It can switch the dive position according to different recipes, and the operation is more stable.
Production statistics and parameter management
The system automatically records production throughput and displays real-time production speeds, as well as system uptime. The system comes with a recipe management function, which can store multiple sets of production parameters according to customer needs. All production parameters can be automatically changed by one-touch switching when changing production.
All production data is power-off retention, and all parameters are not lost in the event of a shutdown or power failure.
The system has a rich interface. In addition to the commonly used serial communication interface, an industrial Ethernet interface and a memory card interface are reserved, which can be easily connected to the customer's management network and can record and save production data.
PRODUCT SPECIFICATIONS
No Item Data
1 Dimension
2000mm*1600mm*2600mm, customized
2 Stand-alone pass rate 99%
3 Filling method
Volumetric piston;
Flow meter ( KROHNE/E+H); Self-flow gravity
4 Speed 20-300bpm Customized based on requirement
5 Voltage 220VAC~380VAC, 50Hz-60Hz
6 Air source 0.4-0.6Mpa clean and stable air source
7 Noise ≦80 decibels
8 Material
Frame: carbon steel, stainless steel frame;
Contact with material: 316L stainless steel;
Filling head: 316L stainless steel;
Material pipe: sanitary grade steel hose;
Connected and fixed mechanical parts: SUS304 stainless steel;
Control valve: 316L stainless steel;
Screen door: stainless steel edging, plexiglass
9 Electrical components
PLC:Siemens
Touch screen: Siemens
Servo: Siemens
Breaker: Siemens
Sensor: IFM/LEUZE
Button: Schmeral
--------------------------------------------------------------
Business Channel: / mrjackdu007
Email: [email protected]
Whatsapp:+86-15811882441
Информация по комментариям в разработке