FarDriver reverses after regen, one fix.

The Fardriver, with very moderate regen amps 10a/15a) and 100% across the board set in Energy Regenerate settings, with either throttle release or brake sensor activated regen will cause the motor to stop fast but then reverse a few times in short bursts.

One way to stop it is to set the lowest RPM at 0% and the second lowest RPM at 50%, which pretty much remains all reverse kickback.

There may be other settings somewhere that fixes it. If you know another solution, leave a comment.

0:00 setting up regen
0:29 my battery is 15AH so I’m starting with 10a/15a regen and all speeds set to 100%.
0:35 first test with no regen.
1:01 now set Throttle release regen on and test again.
1:08 notice how the motor runs in reverse a few short bursts.
2:12 need to reboot controller first
2:43 set the lowest RPM to 0% and second lowest to 50%.
2:51 now we test again.
3:08 mow its ready for road test to get regen amps set optimally and then adjust the percents down from 100% if any specific RPM regen it too much.