Building a 3D Printed Helmet From Halo - EOD Printing & Sanding

Hi everyone!
So this is the first part of my EOD Helmet build from Halo Reach. I thank all of you who have been patient as I work on my prints! Please let me know what other things you'd like to see in the near future in the comments below! I hope to get out the second part of this build out within this next week or two.
Here is the link to the shop I purchased the model from: https://www.aguilarworkshop.com/produ...

3D Printers I use - CR-10 V3 - https://amzn.to/3CcfxG2
Print Settings
-0.6mm nozzle
-3 layer walls
-15% density
-7% support density
-75 mm/s speed

Tools Used:
_____________________________________________

-Milwaukee M12 Detail Sander - https://amzn.to/3I3uayY
-Filler Primer (Similar to the one I used in video) - https://amzn.to/3FYIExq
-3M Sanding Blocks - https://amzn.to/3WJZ5EJ
-Precision Kit - https://amzn.to/3YRt7bh
-Cutting Pliers - https://amzn.to/3YTc88P
-Compressed Air Cans ( Air compressor works the same) - https://amzn.to/3Wsi46T

Camera Gear:
_____________________________________________

Sony A7SIII - https://amzn.to/3WD8H4g
Sigma 24-70mm - https://amzn.to/3Gu5ezL
Go Pro Hero 10 - https://amzn.to/3C2idFY