How to Replace Ignition Coil Wiring Harnesses 2007-2011 Toyota Camry

Buy Now!
New Ignition Coil Wire Harness from 1AAuto.com https://trq.video/ia-1AERK03741
New Ignition Coil Wire Harness from 1AAuto.com https://trq.video/ia-1AZWH00112

This video shows how to replace the harness on your 2007-2011 Toyota Camry. If the wiring harness on your neutral safety switch is damaged, or disconnected, you may have problems starting your vehicle.

This repair was done on a 2007 Toyota Camry SE 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2007 Toyota Camry
2008 Toyota Camry
2009 Toyota Camry
2010 Toyota Camry
2011 Toyota Camry

Tools you will need:
• 10mm Socket https://trq.video/obtN-1AXAA00017
• Crimper
• Wire Cutters
• Wire End Cutters
• Socket Driver
• Gloves https://trq.video/oaEK-1AXSS00048
• Safety Glasses
• Heat Gun

Subscribe:    / @trq  

Check out our playlist:
Toyota Camry 2007-2011 6th Generation:    • Toyota Camry 2007-2011 6th Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.