How to Install Remote Start for a Nissan Altima (2013-2018)

We are going over the steps to install a MPC remote start system on a 2015 Nissan Altima 2.5 S. The remote start system will use the factory remotes to start your vehicle by pressing the "lock" button three times.

Update: For the new Remote Start Systems, omit Steps 12-15. The new units have an OBDII connection for power. Just plug the connector in the OBDII outlet under the dash.

1. Intro - 0:01
2. Step 1 (Lower Steering Wheel) - 0:10
3. Step 2 (Remove Steering Column Screws) - 0:18
4. Step 3 (Remove Steering Column Cover) - 0:47
5. Step 4 (Remove Cluster Lid (A)) - 1:17
6. Step 5 (Remove Combination Meter Screws) - 1:56
7. Step 6 (Remove Instrument Side Finisher) - 2:15
8. Step 7 (Unseat Instrument Lower Panel) - 2:25
9. Step 8 (Remove Instrument Pad) - 3:00
10. Step 9 (Disconnect Start Button) - 3:16
11. Step 10 (Remove Combination Meter) - 3:33
12. Step 11 (Disconnect BCM Connectors) - 3:55
13. Step 12 (Prep Harness Connections) - 4:44
14. Step 13 (Attach/Connect Ground Wire) - 6:26
15. Step 14 (Install Fuse Tap Adapter) - 6:49
16. Step 15 (Connect Hood Switch) - 7:12
17. Step 16 (Connect T-Harness Plugs) - 7:36
18. Step 17 (Reconnect Start Button) - 8:08
19. Step 18 (Pair Module) - 8:18
20. Step 19 (Disconnect Module) - 9:22
21. Step 20 (Load Vehicle Setting) - 9:43
22. Step 21 (Reinstall Module) - 11:54
23. Step 22 (Test System) - 12:05
24. Step 23 (Disconnect Start Button) - 12:23
25. Step 24 (Secure Harness/Cables) - 12:31
26. Step 25 (Install Combination Meter) - 12:41
27. Step 26 (Install Combination Meter Screws) - 13:02
28. Step 27 (Install Instrument Pad/Start Button) - 13:17
29. Step 28 (Reseat Instrument Lower Panel) - 13:36
30. Step 29 (Install Cluster Lid/Steering Column) - 13:43
31. Step 30 (Install Instrument Side Finisher) - 14:01
32. Step 31 (Install Steering Column Screws) - 14:08
33. Step 32 (Verify Gauges/Vehicle Functions) - 14:20
34. Step 33 (Clear Engine Codes (If Required)) - 14:32
35. Step 34 (Verify Gauges/Vehicle Functions)- 15:23

Installation Instructions:
Fortin FlashLink-Lite Updater Video -    • Fortin FlashLink-Lite Updater - Firmw...  
Flash Link Manager 4.51 - https://fortin.ca/en/support/flashlin...
MPC Instructions (PDF) - https://drive.google.com/file/d/1x7IO...

Products Used:
This video contains affiliate links for which I may receive compensation.
MPC Remote Start Kit - https://amzn.to/3ZqnqBy
BlueDriver OBDII Scan Tool - https://amzn.to/3vTowrX
Trim Removal Tool Set - https://amzn.to/35Lry84
Fuse Tap Fuse Holder - https://amzn.to/3CEnN1P
Butt Connectors - https://amzn.to/3k9KnbV
Wire Stripping Tool - https://amzn.to/3XhsdE9

Tools:
OBDII Scan Tool
Trim Removal Tool Set
Wire Cutter/Stripper
Phillips Screwdriver
Microfiber Cloth

Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on YouTube is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on YouTube. Use this information at your own risk.

#Altima #RemoteStart