5th Gen 4Runner Rear Bumper Build - Coastal Off-Road Dual Swing Out

In this video I will take you through the whole process of building the Coastal Off-Road dual swing out rear bumper kit for the 5th Gen 4Runner. This is a big project but it can easily be broken down into smaller increments.

I used a basic 140amp (120v) welder for 85% of the welds and then had a professional reinforce and add welds to the important spots. This gave me peace of mind while allowing me to save a fair amount of money.

Bumper kit used in video - https://www.coastaloffroad.com/produc...

Welding Magnets Used - https://amzn.to/3xJcBBh
M8 1.25 Tap (for frame bolts and license plate) - https://amzn.to/4aC5VUc
Wrench handle for the above tap - https://amzn.to/4aFAsAi

There were additional costs involved for materials.
2x metal grinding discs
2x 60 grit flap discs
~5lbs of mig wire
Some additional costs for hardware (washers/bolts)

Upol Raptor liner was used to finish the project and all bare metal was first coated in Upol self etching primer.

Thanks so much for watching!

As an Amazon Associate, I earn commission from qualifying purchases at no extra charge to you. Thank you for your support!