A. LANGE & SÖHNE Odysseus Chronograph. Powered by the newly developed L156.1 self-winding calibre.

#alangesohne #odysseuschronograph #sportswatches ‪@alangesoehne‬
The Odysseus Chronograph is the first A. Lange & Söhne self-winding chronograph! Four years ago, with the Odysseus, the A. Lange & Söhne watchmakers launched their first sporty-elegant timepiece, showcasing a unique design and a customised, exquisitely finished movement. Now, the Odysseus Chronograph is the sequel to the success story of this watch family. With the youngest member of the Odysseus watch family, A. Lange & Söhne once again
forayed into unknown territory, thus underscoring its expertise in the area of short-time
measurement. To this day, designing and building a chronograph calibre is considered to be
one of the greatest challenges in precision watchmaking. Only a few manufacturers possess the
knowledge and ability to develop and craft a similarly complex movement. With a total of 13
manufacture movements, chronographs have been among the most coveted A. Lange & Söhne
models since 1999.
“The Odysseus Chronograph Transports the contemporary and one-of-a-kind design of
the watch family to a new technical dimension. It meets all the requirements of a stopwatch
suitable for many fields of application, without relinquishing the hallmarks of Lange precision
watchmaking,” says Anthony de Haas, Director of Product Development.

To retain the characteristic dial design of the Odysseus, the manufactory developed a
customised movement that positions both chronograph hands in the centre, the minute counter
with a lozenge-shaped tip as well as the red chrono seconds hand. As a consequence, the
totalisers, which are conventionally arranged at 3 and 9 o’clock, could be dispensed with, and
the style-defining positions of the outsize date and day of the week could be maintained.
Owing to the expansion of the measuring range from 30 to 60 minutes, the Lange developers
succeeded in introducing new fields of application for the chronograph. Additionally, it is
endowed with an innovative, dynamic reset-to-zero function. When the reset-to-zero button at 4
o’clock is actuated after a time measurement, a short but impressive spectacle ensues: while
the minute counter jumps back to its starting position in the conventional way, the red chrono
seconds hand covers the entire distance travelled beforehand within a fraction of a second‒
one full revolution for each measured minute. If the minute counter has not reached the 30-
minute mark yet, the two hands move anti-clockwise. If the minute counter has passed the 30-
minute mark, both hands will advance to zero clockwise. At high speed, the chrono seconds
hand performs a full revolution for every minute required to reach the full hour.

To assure safe and easy operation of the chronograph, the Lange product developers equipped
the specially sealed, tapered buttons with a novel dual function. In the normal position of the
screw-down crown, the buttons at 2 and 4 o’clock are used to operate the chronograph
functions: start, stop and reset to zero. When the crown is pulled, the date and day of the week
can be corrected with a newly developed mechanism.

Price March 2023: 135,000 Euro including VAT (a subject to possible changes of course!)

Movement
Lange manufacture calibre L156.1 Datomatic®, self-winding, crafted to the most exacting Lange quality standards, decorated and assembled by hand; precision-adjusted in five positions; unidirectional winding central rotor with 950 platinum centrifugal mass; balance bridge engraved by hand

Movement parts
516

Jewels
52

Screwed gold chatons
4

Escapement
Lever escapement

Oscillation system
Shock-resistant cam-poised balance with four poising screws, superior-quality balance spring manufactured in-house, frequency 28,800 A/h (= 4 Hz), precision beat adjustment system with cam and whiplash spring

Power reserve
50 hours when fully wound

Functions
Time indicated in hours, minutes, and subsidiary seconds with stop seconds; date and day-of-week displays, chronograph with central chrono seconds hand and 60-minute counter

Operating elements
Screw-down crown for winding the watch and setting the time; two buttons for correcting the date and day of week as well as operating the chronograph

Case dimensions
Diameter: 42.5 millimetres; height: 14.2 millimetres

Movement dimensions
Diameter: 34.9 millimetres; height: 8.4 millimetres

Case
Stainless steel

Water resistance
Up to 12 bar (120 metres)

Dial
Brass, black

Hands and appliques
Hours and minutes: white gold, luminous; subsidiary seconds: white gold; 60-minute counter: rhodiumed steel, luminous; red chrono seconds hand: aluminium; baton appliques: white gold, luminous

Crystal and caseback
Sapphire crystal (Mohs hardness 9)

Bracelet
Stainless steel

Buckle
Safety deployant buckle with precision adjustment mechanism for adjusting the length

Limited Edition
100 watches, edition engraving, boutique-exclusive

#watchesandwonders2023