Shot Glass Display Case

Here’s a first time build for me, a Shot glass display case. This DIY build costs $40.00 in lumber from Lowes. I used the premium pine lumber. The case holds 42 shot glasses. Size of the cabinet is:
24 3/4 inches wide
23 inches tall.

Material List is as follows:

5- 1/2” x 4” x 24”
2- 1” x 4” x 48”
1- 1/4” x 2ft x 2ft sheet of plywood
**I bought a 1/2” x 6” x 2ft board also but it was not used or needed**

Cut List:

*Cut the 5- 1/2" x 24" @ 24 inches due to not actual size when purchased (case shelves)
*2- 1" x 4" @ 23 1/4" (top & bottom of case)
*2- 1" x 4" @ 23" (left & right side of case)
*1/4' x 2ft x 2ft plywood (use as is, no cutting required)
**Drilled shot glass holes with a 1 5/8 Forstner Bit


Not a very difficult build but it is time consuming.

Thanks for watching!!!