Soul Tramp Amplification Rail Rider Walk Through

http://www.soultrampamps.com A clean channel with the crystal clear chime of the early British amps and a second "Soul" channel with the full bandwidth warmth of the 60's American amps. Then a third channel to takes it all into higher gain over-drive; all controlled with a 3-button footswitch.
The "Rail Rider" is a 20 watt EL84 Push-Pull amplifier that uses a high voltage power amp to produce in-you-face presence, and a flexible three channel preamp that lets you shape the voicing across a broad spectrum; from Country to Blues to Classic Rock.
The articulate note separation and swirling harmonics are a clear indication of the clean signal path and thoughtful design. Tube driven spring reverb produces concert hall dynamics, and the flexible FX loop lets you extend tone shaping beyond the amp's onboard controls.
Specifications
20 Watts - EL84 P/P
Fixed Bias
Diode Rectified
Three Channels
3-Button Footswitch
Tube Driven Spring Reverb
FX Loop - Serial/Parallel Tube Buffered With Level, Mix, and Bypass Controls
Mercury Magnetics Transformers
4, 8, 16 ohm speaker load that is switch selectable
Power Tubes - Two EL84 running high plate voltages
Preamp Tubes - Four 12AX7, Two 12AY7, One 12AT7
Dimensions - 20.75"L x 11"W x 10"H
Weight - 30 lbs