💎 How To Scan StarTimes / SES 5 5°E FTA Channels | Newmax Decoder | Pbteck

How To Scan StarTimes FTA Channels On Newmax Decoder






To scan for StarTimes Free-to-Air (FTA) channels on a Newmax decoder, follow these steps:

1. *Connect Your Decoder:*
Ensure your Newmax decoder is properly connected to your TV and antenna.
Make sure the antenna is positioned correctly to receive signals.

2. *Power On:*
Turn on both your TV and the Newmax decoder.

3. *Access the Menu:*
Using the remote control, press the “Menu” button to access the main menu.

4. *Navigate to Installation:*
In the main menu, look for the “Installation” or “Setup” option and select it. This may be labeled differently depending on the decoder model.

5. *Select Auto Scan:*
Within the Installation menu, find and select the “Auto Scan” or “Auto Tuning” option. This will prompt the decoder to start scanning for available channels.

6. *Choose FTA Only:*
If prompted, choose to scan for Free-to-Air (FTA) channels only. This ensures the decoder skips encrypted channels.

7. *Start Scanning:*
Confirm and start the scanning process. The decoder will search for and store all available FTA channels.

8. *Save Channels:*
Once the scan is complete, the decoder will display the number of channels found. Save the channels if prompted.

9. *Exit Menu:*
Exit the menu and start watching the newly found channels.



To scan SES 5 satellite channels, you'll need to follow specific steps that involve configuring your satellite receiver. Here's a general guide to help you through the process:

Equipment Needed:
1. **Satellite Dish**: Properly aligned to the SES 5 satellite position.
2. **Satellite Receiver**: Compatible with SES 5 satellite signals.
3. **TV**: Connected to the satellite receiver.
4. **Coaxial Cables**: For connecting the dish to the receiver and the receiver to the TV.

Steps:

1. **Align Your Dish**:
Ensure your satellite dish is correctly aligned to the SES 5 satellite. The SES 5 satellite is located at 5° East.
Use a satellite finder tool to ensure the dish is pointing accurately at the SES 5 satellite.

2. **Connect Your Equipment**:
Connect the LNB on the satellite dish to your satellite receiver using a coaxial cable.
Connect your satellite receiver to your TV using HDMI or RCA cables, depending on the available ports.

3. **Configure Your Satellite Receiver**:
Turn on your TV and satellite receiver.
Access the receiver’s setup menu (this varies by receiver; consult your receiver's manual if needed).

4. **Input Satellite Settings**:
In the receiver's menu, find the satellite configuration section.
Select SES 5 from the list of available satellites. If it's not listed, you might need to manually enter the satellite parameters:
**Orbital Position**: 5° East
**Frequency Range**: Typically around 10.7 to 12.75 GHz for Ku-band (verify the exact transponder frequencies if available)
**Symbol Rate**: Commonly 27500 Ksps (varies by channel)
**Polarization**: Vertical or Horizontal (depends on the channel)

5. **Perform a Blind Scan**:
In the satellite settings menu, choose the option to perform a “Blind Scan” or “Auto Scan”.
This will scan all frequencies and transponders on the SES 5 satellite and store the available channels on your receiver.

6. **Save the Channels**:
After the scan is complete, save the found channels.
Exit the menu and return to the main screen.

7. **Fine-tune and Organize**:
You may want to organize the channels into a preferred order or create favorites lists.
Check the quality of the signal for each channel and fine-tune the dish alignment if necessary to improve reception.

Troubleshooting Tips:

**Weak Signal**: If you have a weak signal or no signal, double-check the dish alignment, LNB skew, and all cable connections.
**Firmware Update**: Ensure your satellite receiver has the latest firmware updates, as these can affect channel scanning and reception.
**LNB Compatibility**: Make sure the LNB on your dish is compatible with the frequency band (C-band or Ku-band) used by SES 5.




__________________________________
LINKS


WEBSITE:

https://www.pbteck.com






INSTAGRAM;


  / pbtecknology  


FACEBOOK;


  / pbtecknology  


TWITTER


  / pbtecknology  







TELEGRAM:


https://t.me/pbtecknology








#pbteckinfo #lnb #gotvinstallation #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #freefire