How to replace Front Brake Caliper 2008-2012 Honda Accord

Buy Now!
New Brake Caliper from 1AAuto.com https://trq.video/ia-1ABCR00206

This video shows you how to a front brake caliper on your 2008-2012 Honda Accord. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.

This repair was done on a 2010 Honda Accord LX-S 2.4L Coupe 2-Door FWD Manual and the process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord

Tools you will need:
• 10mm Socket https://trq.video/o8Q-1AXAA00017
• 12mm Socket https://trq.video/oahG-1AXAA00015
• 14mm Socket https://trq.video/oahG-1AXAA00015
• 17mm Socket https://trq.video/oahG-1AXAA00015
• 19mm Socket
• Brake Caliper Hanger https://trq.video/odZ-1AXAA00439
• 1/4 Inch Ratchet https://trq.video/o8Q-1AXAA00017
• 3/8 Inch Drive Ratchet https://trq.video/oahG-1AXAA00015
• Torque Wrench https://trq.video/oQv-1AXAA00044
• Brake Grease
• Gloves https://trq.video/ok2-1AXSS00048
• Safety Glasses
• Drain Pan

Subscribe:    / @trq  

Check out our playlist:
Honda Accord 2008-12 8th Gen:    • Honda Accord 2008-12 8th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.