How To Do A Full Below The Window Roof Raise On A Skoolie- Square Tubing/Sheet Metal Prep

In this video we show how we added square tubing support for the front, sides and the back of the bus, as well as some other prep we have done before we put the sheet metal on, such as removing old sealant and priming the sheet metal around existing rivet holes.
Our next video will show how we installed the sheet metal.

Items recommended for this project:
DEWALT Wire Wheel, Cable Twist, 4-in. (DW4930):
https://amzn.to/3IrrgRh
Cutting Wheel 50 PCS Cut Off Wheel 4.5"x.040"x7/8":
https://amzn.to/3uhYgpR
DEWALT Angle Grinder Tool:
https://amzn.to/3ioAdjH
RUST-OLEUM 242252 Metal Primer:
https://amzn.to/3KVU0TG
DEWALT Bar Clamps with Trigger:
https://amzn.to/3JuJqmu
Rust-Oleum 7582838 Professional Primer Spray Paint:
https://amzn.to/3JtCTsl
Pro Grade - Paint Brushes - 5 Ea - Paint Brush Set:
https://amzn.to/3iqT8KA

Follow our build progress and our adventures on youtube, instagram and facebook:
  / wideawaketravels  
  / wideawaketravels  

http://www.wideawaketravels.com

See our other roof raise related videos:
   • Skoolie roof raise - step by step  

Disclosure: We only recommend products we would use ourselves and all opinions expressed here are our own. This post may contain affiliate links and we may earn a small commission if you use these links to buy something. Thank you.