GOTH-3Designs - Kylo Ren Master Chassis - DIY Build Timelapse - Star Wars FX Lightsabers

Here is a new Master Chassis build timelapse video, for @KR Sabers KRORssguard / Kylo's Lightsaber.

This new Master Chassis is already available for DIY and all details are here: https://goth-3designs.com/instruction...

Chapter 1 - Parts Preparation
00:00:00 - Step 1 - Clean the hilt body / test fit
00:00:35 - Step 2 - Prepare plastic parts
00:01:30 - Step 3 - Metal parts weathering

CHAPTER 2 - Upper Hilt Install
00:07:03 - Step 4 - Cut the M2.5 threaded rods
00:08:35 - Step 5 - NPXL PCB holder adjustment
00:09:25 - Step 6 - Emitter preparation
00:11:23 - Step 7 - Side blades NPXL PCB install
00:13:54 - Step 8 - Main NPXL PCB install
00:20:23 - Step 9 - Switches PCB Install
00:21:52 - Step 10 - Wires management
00:26:33 - Step 11 - Upper hilt rebuild
00:28:31 - Step 12 - Engine install
00:32:07 - Step 13 - Blue wires install

CHAPTER 3 - Crystal Chamber Build - Part 1
00:35:03 - Step 14 - Accent 1.5mmOD rod install
00:36:13 - Step 15 - Cut the 4mmOD tubes and 1.5mmOD rods
00:38:18 - Step 16 - Glue the magnets
00:42:33 - Step 17 - Glue the tubes
00:43:41 - Step 18 - Drill the side tube for the 1.5mmOD rod
00:44:12 - Step 19 - Blue wires install
00:47:50 - Step 20 - CC doors install
00:49:18 - Step 21 - Crystal holder install

CHAPTER 4 - Crystal Chamber Build - Part 2
00:50:07 - Step 22 - Motor install
00:51:56 - Step 23 - Glue the CC spinning part
00:52:38 - Step 24 - Assemble the CC to the top hilt
00:54:45 - Step 25 - Add the side door 1.5mmOD rod
00:55:55 - Step 26 - Install the single pixel on crystal

CHAPTER 5 - Battery Module Install Part 1
00:56:20 - Step 27 - Sounboard door install
00:58:10 - Step 28 - Crystall install
01:01:02 - Step 29 - Join the main chassis to the CC
01:02:04 - Step 30 - Accent 2020 NPXL strips install
01:06:18 - Step 31 - Add the strips diffuser

CHAPTER 6 - Battery Module Install Part 2
01:07:45 - Step 32 - Positive battery tab install
01:09:36 - Step 33 - Kill switch install
01:11:28 - Step 34 - Pre-install the speaker
01:12:16 - Step 35 - Negative battery tab install

CHAPTER 7 - Soundboard Install
01:13:10 - Step 36 - Wire the soundboard

CHAPTER 8 - Covers Install
01:20:09 - Step 32 - OLED screen and cover install
01:23:21 - Step 33 - Speaker install
01:23:51 - Step 34 - Battery cover install
01:24:17 - Step 35 - Lock the assembly with 1mmOD tubes or rods

CHAPTER 9 - Hilt Completion
01:27:51 - Step 36 - Glue the red wire holder
01:28:48 - Step 37 - Red wire install
01:30:46 - Step 38 - Glue the pommel cap

FINAL CHAPTER
01:31:06 - This chassis is a nearly full metal core, which Crystal Chamber design is inspired from the hilt engines, with doors that open to reveal the crystal and spinning plasma gate:
- ProffieBoard 2
- Removable 18650 Keeppower battery
- Neopixel
- OLED screen

(Video soundtrack - Star Wars The Old Republic)