What is the defect of the burrs on the Ramp Plate? How to repair the burr? Dr.Pulley

If you are not sure whether the edge of the Ramp Plate will abrade the weight roller, it is recommended to remove it.


The relevant parts include ramp plate, weight roller and variator.


This is the burr on the Ramp Plate, which is the main point of this explanation. We mentioned P=F/A last time. The area of the burr that is in contact with the weight roller is very small, and the pressure will be very large, resulting in increased wear and tear.


As we are not often online with the account,
if you have any question,
Please contact us through Contact Form as possible,
We will reply to you later.
https://drpulley.co/contact-us/


Subscribe:
   / drpulley  
Website URL:
https://drpulley.co/
Over-Range Variator Kit
https://drpulley.co/product-category/...
Facebook:
  / dr-pulley-342956354476  






Chapter
00:00 Start
00:07 Foreword
00:21 Basic Introduction
00:58 What effect is the burrs on the Ramp Plate?
01:54 What do the edge burrs look like?
03:03 Tool Preparation
03:39 Trimming Ramp Plate
04:34 How is acceptable?


Music
Jingle Punks - Morning Walk from    • Morning Walk – Jingle Punks (No Copyr...  
Ikson - Merry