How To Read Piping Isometric Drawing 📚 Isometric Drawing Engineering Drawing PART - 3

How To Read Isometric Drawing


In a piping isometric drawing, pipe is drawn according to it's length, width and depth and often shown in a single view. The isometric drawing are created from information found on a plan and elevation views.

This isometric drawing show the two locations vertical rolling.
first vertical rolling need to two 45 Degree elbow 6" required and calculate travel length.
Can you see my all videos in "Piping Isometric Drawing" Double Rolling, Horizontal Rolling, vertical Rolling, find the travel length, Elevation, Coordination, Which type of fittings, Pipe metal code.
   • HOW TO SEE STRUCTURE STAIR CASE (LADD...   ( Structural Stair Case }
   • How To Study Piping Isometric Drawing...   ( How To Read Piping Isometric Drawing }
   • How To Study Piping Isometric Drawing...   { How To Read Isometric Drawing }
   • How To Cut Every Degree Pipe Angel Be...   { How To Cut Every Degree angel, Beam, Channel, Pipe }
   • How  To  Read Piping Isometric Drawin...   { How To Read Isometric Drawing Part - 1 }
   • How To Read Piping Isometric Drawing ...   { How To Read Isometric Drawing Part - 2 }
   • How To Calculate Double Rolling Offse...   { How To Calculate Double Rolling Offset }

Second location find the again vertical rolling so required to 90 degree elbow but 55 degree elbow make to 90 degree cut and fit up then 90 degree elbow roll to 35 degree .
Every location mention the elevation and two locations find the eccentric reducer first is 8"/6" offset 25 mm second 8"/12" offset 52 mm.
Symbols like fittings elbow, un equal tee, eccentric reducer
Pipe 12" / 8"/ 6"
Pipe fitter
Fabricator
Piping Charge hand
Piping Foreman
Piping Supervisor
Piping Suptd.
We will go in oil, gas, petrochemical, refinery plant so many types of hazard
Hot work
Cold work
Confined spec
work and height
Excavation
Reactor inside work
Vessel Inside work
Spool Fabrication, support fabrication, Like dummy, tunion, shoe support, guide support, latteral branch, many types of support in piping isometric Drawing.
spool Fabrication, spool erection, as for plan and isometric Drawing, punch list, hydrotest, commissiong.


🙏 Please subscribe to my channel and share to my video

THANKS FOR WATCHING VIDEO 🙏📚📚📚📚