DSC pc1832 - Program Keypads to Partitions

1. Partition 2 – 8 Enable
Partitions 2 through 8 must be enabled before keypads assigned to a partition 2 – 8 will operate.
To enable partition 2 to 8, perform the following:
Enter [*][8][Installer’s Code] Enter Installer’s Programming
Enter [201] Enter Partition 1 to 8 Enable
Press [2] to turn ON option [2] Enable Partition 2
Press [3] to turn ON option [3] Enable Partition 3
...
2. Keypad Assignment
Program the Partition Assignment and Slot of each keypad. To assign the keypad, perform the
following:
Enter [*][8][Installer’s Code] Enter Installer’s Programming
Enter [000] Enter Keypad Assignment Section
Enter [0] Enter Partition and Slot Section
Enter a two-digit number.
The first number represents the partition assigned to the keypad
The second digit represents the supervisory slot.
Each keypad MUST have a different slot number:
Enter data [1] to [8] for supervisory slot #1 to #8
The same procedure must be performed on each keypad