Скачать или смотреть Stepper Motor with Siemens S7 1200 using TIA V17

In this Video i talk about how to program a Stepper Motor with Siemens S7 1200 using TIA V17. It takes just over 20 Minutes to do the configuration and write the program code. A Stepper Motor is operated by a drive. The drive initiates one step at the motor with every pulse it gets from the plc controller. In my case i did use a S7-1200 CPU.
0:00 Intro
0:23 Create the technology object
1:26 Configure the technology object
1:59 Assign the output according to the hardware
3:05 Configure the mechanics (Gearing)
3:43 Position limits
7:45 Where to find the variables to display in the HMI
8:20 Writing the program code with the instructions
9:00 Setting the block mc_power
11:20 Setting the block mc_home
13:09 Programming the mc_reset
14:55 Setting mc_Movejog
17:29 mc_moveabsolute
20:42 mc_halt

If you like my videos i would appreciate you to consider joining my gofundme account and donationg a small amount. Thank you very much:
https://www.gofundme.com/f/automation...


Zeller Presscontrol Systems
Gerd Zeller
Tel. +49 170 961 6819
https://www.zeller-presscontrol.com
[email protected]