Parking your bike for the winter is a drag, but a little prep work now means your motorcycle will be ready to ride when the weather warms up. Here’s what to do.
--
Yup, it's getting to be that time of year when it's getting too cold for some of us to ride, and if your idea of putting your bike to bed for the winter entails draping an old sheet over it and calling it good, you're liable to have some issues when spring rolls around. So, before you park your bike for the season, there are a few steps you'll want to take to ensure your ride is ready to rip when the weather warms up.
At a minimum, you've got to attend to the fuel system and the battery. Whenever you're parking your bike for an extended period of time you run the risk of having your battery go dead and the gas gumming up.
Deal With Your Fuel System And Gas
Luckily, a tank full of foul-smelling swill is pretty easy to avoid. If your bike has carburetors and a petcock, you can easily drain the fuel system. However, most modern bikes are fuel injected, and there's really no easy way to empty the tank. Instead, I like to fill the tank to the brim and mix in a fuel stabilizer. A quality fuel stabilizer will keep the gas from going bad and it also helps neutralize the ethanol that's in today's gasoline so it doesn't wreak havoc on your fuel system.
Storing the bike with a full tank does two things: First, it doesn’t leave any room for air inside the tank, so rust is less likely to form. Second, you roll into the next riding season with plenty of gas for that first ride. So go ahead and top the tank off, add some stabilizer, and run the bike for a few minutes so that treated gas makes its way throughout the fuel system.
Prepare Your Battery For A Winter's Slumber
The next big concern is the battery. Traditional lead-acid batteries self-discharge over time, and, left alone, your battery will probably be too weak to start your bike after a few months. So it's really, really important to hook the battery up to a smart charger so it stays topped up and ready to crank. There are lots of chargers and maintainers out there, but you want to make sure you get a smart charger that only feeds current to the battery when needed. If you've got a lithium-ion battery in your bike, you can get away with just disconnecting the negative terminal. Lithium-ion batteries have an extremely low self-discharge rate and can sit for a year or more without losing much juice. If you don't have access to a power source where you're storing your bike, or live in an apartment, you'll want to remove the battery from the bike and plug it into a trickle charger indoors.
Okay, so if you’re in a hurry or just lazy, then those are the minimum requirements for winterizing your bike. But if you want to do everything you can to preserve your motorcycle’s finish and moving parts, here are a few more things you should do.
Clean Your Motorcycle
Before you mothball the bike, give it a proper bath to wash off the grime and dead bugs and other stuff that can corrode the paint and metal. Then wax the painted parts, apply a silicone protectant to plastic panels, and wipe down chromed, polished, or anodized metal components with a rag that's been moistened with an aerosol lubricant. The wax and silicone will keep those painted and plastic parts clean and protected, and the light oil in the lubricant will help prevent metal from rusting. Speaking of rust, make sure you thoroughly clean and then lube your chain.
Winterizing Your Engine
Next, let's turn to the engine. Extremists insist you need fresh oil in the fall before storage and fresh oil come spring. That's overkill and a waste. Of course, you don't want dirty oil sitting in the engine stagnating all winter, so if you're more than halfway to your next scheduled oil change, go ahead and do it now. That way the engine internals are bathed in fresh engine oil and you'll be ready to ride in the spring. If the oil is pretty fresh, just make sure it's topped up.
Make Sure Pests Don't Call Your Motorcycle Home
Another thing you may want to do for your motor is to close the doors. I’m talking about blocking the muffler and airbox inlet with heavy plastic and a rubber band or zip-ties. This takes care of two things: First, it’ll discourage rodents from nesting in your airbox and muffler, and it’ll seal out moisture that could potentially corrode your valves or cylinder walls.
Full story here: https://www.motorcyclistonline.com/ho...
Subscribe: http://www.youtube.com/c/Motorcyclist...
Motorcyclist Shirts: https://teespring.com/stores/motorcyc...
Shop Products We Use: https://www.amazon.com/shop/motorcycl...
See more from us: http://www.motorcyclistonline.com/
Информация по комментариям в разработке