FENIX LD40R V2.0 ปรับปรุงสวิชเป็นมิตรกว่าเดิม เพิ่มแบ็ตฝังในจุใจ ถอดไม่ได้แต่สเถียร

฿10500 THB Link https://www.facebook.com/Bhumipat.Kan...
The Fenix LR40R V2.0 Search Flashlight is high-performing and rechargeable, combining a spotlight and floodlight to blast a maximum output of 15000 lumens up to almost 1000 yards. Quickly charge this flashlight’s built-in battery pack in as little as 4 hours via the USB Type-C port, or use the discharge function to charge your other devices. Its unique rotating switch, along with its push-button switch, allows you to access 16 lighting modes. Choose spotlight, floodlight, or both. Powerful light for any situation makes this flashlight the perfect tool for search and rescue.

SPECIFICATIONS
Max Lumens: 15000
Max Beam Distance: 2953 feet (900 meters)
Max Runtime: 177 hours
Lighting Modes: 16 modes including 4 spotlight levels, 5 floodlight levels, 5 combo levels, strobe, and SOS
Bulb Type: Luminus SFT70 LED and sixteen Lumileds HL2X LEDs
Color Temperature: around 6000K
Size: Length: 6.89” (175mm) Head: 3.23” (82mm) Body: 2.17” (55mm)
Weight: 29.7 oz. (842.5g) including battery
Battery: Built-in battery pack constructed from three 5000mAh batteries
Included: Type-C charging cable, lanyard, holster
Warranty: Limited Lifetime Guarantee from Fenix Lighting USA

On/Off
With the the light locked, rotate the toggle switch to any mode to turn on the light.
With the the light switched on, rotate the toggle switch to lock mode to turn off the light.
With the the light unlocked, press and hold the electronic switch for 0.5 s to turn on/off the light.

Mode Switching
Output Selection
With the the light switched on and unlocked(including flash mode), single click the electronic switch to select output.
Mode A: single click the switch to cycle through Eco→Low→Med→High.
Mode B: single click the switch to cycle through Eco→Low→Med→High→Turbo.
Mode C: single click the switch to cycle through Eco→Low→Med→High→Turbo.
Mode D: single click the switch to cycle through Strobe→SOS→return to last selected output.

Intelligent Memory Circuit
Turn on/off by toggle switch: mode A will be activated on Low each time it is turned on, mode B and C will automatically memorize the last selected output.
Turn on/off by electronic switch: the light memorizes the last selected output. When turned on again the previously used output will be recalled.
Note: mode D will be activated on Turbo each time it is turned on.
Intelligent Brightness Downshifting Sensor
The flashlight has a built-in intelligent sensing circuit. When the light surface is close to the lighting object (about 60mm) for more than 1.5 s, the flashlight will automatically downshift the output level to Low output of mode A to avoid danger caused by high temperature. When the light surface is more than 0.8 s away from the lighting object, the flashlight automatically recalls the previously used output level.

Turning on/off Intelligent Brightness Downshifting Sensor
*By default the sensor is On
To turn Off: With the light locked, press and hold the electronic switch for over 10 seconds. The light will flash quickly 8 times to indicate the sensor has been disabled or flash 2 times enabled.

Charging
First switch off the light and open the anti-dust cap, plug the USB Type-C socket of the charging cable into the light, then connect the other end of the charging cable into the included adapter.
When charging, the charging indicators will flash from left to right to display charging status. The five indicators will be constant-on after charging is complete.
Be sure to close the anti-dust cover once charging is completed.

Power Bank Function
Switch off the light and open the anti-dust cap and insert the USB Type-A socket of the charging cable into the USB discharging port of flashlight, then connect the other USB Type-C socket of the charging cable to the digital device with an USB Type-C port.
Single click the electronic switch to begin discharging, the indicators will recede from right to left to display the status.
Be sure to close the anti-dust cover once charging is completed.
Note：
The light can only be turned on at 100 lumens when charging.
The light and the included charging cable support QC2.0, PD2.0 fast charging protocols.The normal charging time is approximately 4 hours from depletion to full charging.
All modes are available when discharging.
If the voltage is too low, the light will stop discharging.
Battery Level Indication Low-voltage Warning
With the light switched on/off(including locked status), single click the electronic switch to check
Five: 100%-80%
Four：80%-60%
Three：60%-40%
Two：40%-20%
One：20% - 1%
Intelligent Overheat Protection
The flashlight temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user the reselection of High mode.