Differential 500 Mile Break-In Checkup // Diff Fluid Changed & Nitro Cover Installed

Today we brought the Jeep J10 in for the front end 500 Mile Break-In Diff Fluid Changeout & also to have a nice upgraded Nitro Cover Installed.

Perfect Op -
We wanted to share our Standard Differential Care & Break-In Process while we are at it. Below is a list of tips & information you should understand before you peel-out of the installers shop!!

BREAK-IN PROCEDURE:

In order to prevent damage to differential components it is essential to follow the break-in procedure after installation of a new ring & pinion.

New ring & pinions will generate more heat initially after installation and can cause gear oil to break down, leading to premature failure.

On your first drive, stop after the first 15 or 20 miles
(let the differential cool for 20-25 minutes before proceeding)

Drive conservatively for the first 500 miles following installation
(avoid hard acceleration & towing).

After completing standard break-in, tow for very short distances (less than 15 miles) and let the differential cool before continuing during the first 45 towing miles.

Change the gear oil after the first 500 miles. This will remove any metal particles or phosphorus coating that has come from the new ring & pinion.

Premature overloading/overheating will cause gear oil to breakdown, and may result in parts failure.

If you break in your gearset correctly, you'll have a long lasting & durable differential for years to come! Now that you know how to properly break-in new gears, you can share with others who are up for differential service!

Find MORE FAQ & Tech Articles:
http://www.nitro-gear.com/NITRO-TECH-...