ResoNix Sound Solutions - Fiber Mat Sound Absorber & Decoupler Product Spotlight

https://resonixsoundsolutions.com/pro...

https://resonixsoundsolutions.com/pro...


ResoNix Fiber Mat 25 & 45 are a 25mm and 45mm (+/- 1mm) automotive sound absorbing mat that is comprised of hydrophobic polypropylene fibers featuring an automotive-grade peel-and-stick adhesive on one side, and is used in aftermarket automotive installations to serve a few purposes. First, to absorb any incoming external noise, such as wind, tire, and road noise. Second, to decouple one panel from another. It can also act as a superior air gap/decoupling layer for a noise barrier such as ResoNix Barrier. And third, it is also an excellent heat insulator, with an R-value of 3.99, and 7.15 respectively. Due to the material it is comprised of, it is naturally hydrophobic and is completely mold/mildew resistant. This can be used anywhere in a vehicle without worry.

ResoNix Fiber Mat features an automotive-grade adhesive to allow for an easy and lifetime-lasting install. ResoNix Fiber Mat is an absorber that works via the microscopic fibers that convert the passing acoustic energy into mechanical energy (the moving of the fibers) and thermal energy, from the friction of moving through the scattered fibers. It being so soft and plush also offers it to not just being an automotive sound absorbing mat, but also acts as an excellent decoupler that can be used in doors, rear decks, and anywhere else you can fit it. It is a better decoupler than any Closed Cell Foam on the market as it is extremely soft and compliant and is highly suggested to be used on any larger panels. Due to the nature of the product, we still offer our CCF7 to handle decoupling of small panels, and to spot-treat certain areas.


Things to note.

. Hydrophobic and mold/mildew resistant. Water is of no concern for this product.

. Cutting the product with heavy duty scissors and will usually create a sealed edge. Open edges are fine, but if agitated, this can cause fibers to pull out of the opening. Do NOT cut with a razor blade or box cutter. It will not cut cleanly. Scissors only.

. Use INSIDE of doors on outer door skins at your own risk.

. Our automotive sound absorbing mat absorbs sound best when left uncompressed. Having it compressed in certain tight areas is fine, but do not try to stuff areas as tight as possible. It wastes product and decreases the overall performance.


Specifications
. 25mm thick at rest and compressible down to about 4mm (Fiber Mat 25)
. 45mm thick at rest and compressible down to about7mm (Fiber Mat 45
. 54″ x 36″
. R-Value: 3.99 (Fiber Mat 25)
. R-Value: 7.15 (Fiber Mat 45)
. All edges now come sealed. Cutting with scissors is perfectly fine and will create a sealed edge in most cases. Even if it doesn’t, the material will be okay and moisture will still not be an issue
. Adhesive backed for easy installation
. Sound Absorption Coefficient tested to ISO 354 standards

845-274-4357
[email protected]

For more helpful videos and articles, check out the ResoNix Resources and Blog pages.

https://resonixsoundsolutions.com/res...
https://resonixsoundsolutions.com/res...