2014-2020 Toyota Tundra 5.7L V8 Oil Change Step-by-Step How-To

This is a step-by-step how-to tutorial on changing the oil in a 3rd generation 2014-2020 Toyota Tundra V8 5.7L. The instructions should be exactly the same for the Toyota Sequoia and virtually the same for most cars out there. This video shows how to remove the oil access panel on the TRD skid plate, the model-specific oil filter wrench, and where to find the oil drain plug on the oil pan. It also lists all the tools and specific fluids needed to complete this job.

Torque specs:
SAE:
The oil pan drain plug is 30 ft lbs,
the oil filter cap is 18 ft lbs, and
the oil filter cap drain plug is 10 ft lbs.

Metric (provided by Steven Sevek):
Oil filter cap = 25 N•m ± 5 N•m
Oil filter cap drainbolt = 12.5 N•m ± 2.5 N•m


Tools Needed:
3/8 drive ratchet: https://amzn.to/2Gri1Xa
3/8 extension (helpful): https://amzn.to/3iBcsm9
6mm Hex drive to remove skid plate access panel: https://amzn.to/34rtcaz
0w-20 oil (7-8 quarts): https://amzn.to/3jCFVxl
Oil filter: https://amzn.to/33AvTHE
Oil filter wrench: https://amzn.to/3nobgWG
14mm socket: https://amzn.to/2I1oTuX
Oil drain pan: https://amzn.to/3jFHoTO

This is only meant as an information video and work should be done at your own risk. I take no responsibility for any work you perform based on the information in this video. Always double-check with your manufacturer's recommendations and instructions.