Move Bumper Review | No DIY welding required!

Finishing up the 06 conversion on my 4th gen 4Runner, I decided to use a Move Bumper and give a quick review. One of the selling points for a Move Bumper is the DIY weld it yourself, but what if you don't have the right equipment? Today I answer that question and show off the results, let me know down below if you think it was worth it!

Custom 4Runner Fabrication:
https://www.warrenfabdesigns.com/

=====================================================

Tools you'll Need for Installation:
14mm socket & ratchet
Heat Gun

Estimated time to do:
Bumper Install: 5 Min
Fender Liner: 30 Min

=====================================================

For updates and pictures before videos are published, follow my Instagram:
  / my.lame.perspective  

=====================================================

I'm just a normal guy and I am not a trained mechanic. I like to make interesting car mods and show you how I've gone about it, but I can't promise that anything I show you will work for your particular car, or that you won't harm yourself, someone else, your car or warranty doing it. Please be safe, be responsible and unless you know what you're doing, speak to a qualified mechanic. I assume no liability for property damage or injury as a result of any of the information contained in this video. Use the information provided at your own risk.

=====================================================

0:00 - Intro
0:37 - Buying & Welding
1:43 - Custom Fabrication
2:14 - Prep & Drop Off
2:33 - Installation
3:40 - Fender Liners
4:59 - Reveal
5:41 - Final Thoughts & Outro

=====================================================
Tags
#MOVEbumper #4Runner #Welding