#101

In this video, I take a look at making and using a friction drive for removing the chucking method used when woodturning bowls, and in particular, recesses. This method can also be used for reverse mounting bowls with tenons, or pieces that are not able to be reverse mounted onto cole jaws or in a longworth chuck.
For the friction drive chucking method, I used a 100x100x75,, (4x4x3") beech spindle blank which was then covered with a piece of neoprene approximately 100x100mm (4x4"). There is also a small cube with a tiny piece of neoprene on, too.

This is the first video using my permanent filming and live demo set-up and it features the excellent Vicmarc VL300 lathe that is available from Simon Hope at www.hopewoodturning.co.uk.

Useful websites for Woodturners:
****************************************
Remote Demo Bookings: http://www.msabansmith.com
Tuition, Tools, Timber etc: https://www.thewoodturningshop.com
Hampshire Sheen. Find your nearest retailer: https://www.hampshiresheen.com/buy
Woodturners Funnel Club: https://www.woodturnersfunnelclub.com
****************************************
Find Me on Other Social Media
Facebook:   / msabansmith  
Instagram:   / msabansmith  
Twitter:   / msabansmith  
****************************************
Small Print and Disclaimer: Woodturning can be dangerous. The project in this video is a demonstration of a woodturning project and as such may not be suitable for beginners. It is not intended to replace a physical lesson from an experienced woodturner.
At all times, you are responsible for your own safety, that of your workshop and other people in it. Ensure you wear suitable personal safety equipment at all times and follow all the manufacturers instructions for your tools, machinery and other products you may use.
This is my way of turning this project - Other turners may turn it differently and you may find your own way of reaching the same result.
By copying these techniques, you do so at your own risk.
****************************************
Please note that aside from my business interests, I am not sponsored by any of the companies whose products I use. Any review of a product is done so because I like the product. I will never review a product I do not like or not enjoy using.
Thank you for your understanding.
****************************************
The visual video content (including my voice), any text and any graphics in the video are Copyright © Hampshire Sheen Ltd (M. Saban-Smith Woodturning) 2015-2021. All rights reserved.