Скачать или смотреть 0.96" OLED Clock System Re-built with Generative AI in just 90 minutes

I prompted Copilot with the following requirements to re-build clock system with the same HW of previous achivement.
Through several iterations, we clarified the specifications and verified the code—without writing a single line myself. From prompt to working system, it was completed in just 90 minutes. Generative AI proved to be genuinely valuable.

Prompted Requirements
Hardware:
NodeMCU ESP8266 Development Board
0.96" OLED Display Module (SSD1306)
Libraries:
Graphics: u8g2
Others (WiFi, NTPClient, etc.): left to Copilot’s discretion
Wi-Fi Access Point:
SSID: ACP11
Password: xxxxxxxx
NTP Server:
Selection left to Copilot
OLED Connection:
Interface: I2C
Pin Mapping:
G5 → GPIO12 → SCL
G6 → GPIO14 → SDA
Display Layout (divided horizontally into 4 lines):
Line 1: SSID name + IP address
Line 2: Date and weekday → Format: YYYY/MM/DD (Day)
Lines 3–4: Time → Format: HH:MM:SS
LED Behavior:
Onboard LED blinks on every second transition
Time Synchronization:
Once per hour
Triggered 1 minute before the top of the hour
Retrieves time from the network and updates the system clock

Outcome
Through iterative prompting and clarification, Copilot generated a complete and working codebase tailored to my hardware and requirements. I verified the system’s behavior without manually writing any code.
Generative AI proved to be a valuable tool for rapid prototyping and embedded system development.