4g63 Block Cleanup & Oil System Mods

With no data other than another person's testimony and from observing the condition of failed rod bearings I was able to determine this engine suffered problems from high oil pressure. There are 3 modifications that wanted to perform to its oil system, and 2 parts I chose to replace. All of the videos that go into greater detail about these modifications and parts are linked from this video. Though I've covered these topics, this is a video of the work being done to the Hyundai because it's part of its mod list.

Also in the process I've stripped and removed all gaskets in preparation for parts washing. All of these tasks can be completed without an air compressor by taking your time with a razor blade or using electric grinding tools. If you're doing this kind of work, I strongly suggest for time's sake that you use an air compressor. If you have access to an air compressor and any of these [cheap] tools, then you can do these kinds of modifications for less than $20. NAPA sells everything but the spudger (below) individually so there's no need to buy these consumable supplies in bulk.

3m bristle discs:
http://lmgtfy.com/?q=3m+roloc+bristle...

I used this cleaning up the oil pan. It's a spudger. An electronics tool.
http://lmgtfy.com/?q=spudger

I also used 3m Scotch Brite wheels to clean the oil pan's gasket surface.
http://lmgtfy.com/?q=roloc+3m+scotch+...