Dyson Omni-Glide - How To Clean The Clear Bin & Cyclone

How to clean Dyson Omni-Glide Clear Dust Bin & Cyclone

Do not use detergents, polishes or air fresheners to clean the clear dust bin. Do not put the clear bin in a dishwasher. Do not immerse the whole cyclone unit in water or pour water into the cyclones. Clean the cyclone shroud with a dry cloth or dry brush to remove lint and dust.

Look at the canister of your Dyson Omni-Glide. You can see dirt deposited on the filters in the dustbin of the Dyson Omni-Glide. You should clean this filter every three months. Now I’ll tell you the process, how to clean post-filter and bin. So, how do you separate the upper part of this Dyson dustbin and the actual classical container? Just press the red button and holding your hands down. Now you can actually separate as a unit. You see a little button on the dustbin just below of the cyclone, you have to press down the button. I know initially when you see all your Dyson dirt, you just want to put it into a dishwasher or just want to let the water run over it to clean it. But not to do it, you need to have a dry cloth or a dry brush and then brush it off. Never
use water. Clean the canister upper part with water. Wherever you clean a Dyson with water, let it dry for 24 hours. It is very important that all parts of the Dyson are BONE DRY before you use your Omni-Glide again, or else you might destroy your Omni-Glide. After 24 hours put everything back together and put it into your Dyson vacuum cleaner.

Leave me a comment if you'd like some further advice.

You can also find me on Twitter:   / woopnik  


repair engineering Dyson V15 Detect Laser Dust Technology cleaner how to