How To Apply Oil Stain Finish To Open Grain Hardwood - Wood Finish Recipe 2 | Rockler Skill Builders

How to Apply a Stained Finish on Open Grained Hardwood
Examples: Oak, Ash, Mahogany, etc.

How to apply this finish:
1. Sand the project up through the grits until at least 220-grit. It is a good idea to sand pieces that will be hard to reach before assembly.
2. Wipe the project with mineral spirits to check for glue splotches
3. Apply a good quality Oil Pigment Stain, dry 24 hours (Oil stains are easier to apply)
4. Use a good quality urethane top coat finish. Flood it on, let it sit and wipe it off. Let towels dry flat and dispose of properly!
5. If you have any nail holes, cracks or defects in the wood, fill them now with a wood filler putty that matches the color of the stained wood (sand smooth).
6. Apply at least two more coats urethane top coat finish.
7. Optional: After the finish has cured for 72 hours, apply a coat of high-quality paste wax and then polish it off.

Supply Checklist:
- Sandpaper: 80-grit through 220grit (320- and 400-grit recommended)
https://www.rockler.com/3m-no-slip-gr...
- Mineral Spirits
https://www.rockler.com/klean-strip-o...
- Synthetic Finishing Pads
https://www.rockler.com/synthetic-fin...
- Oil-Based Pigment Stain
https://www.rockler.com/shop?w=wood+s...
- Wonderfill Wood Filler
https://www.rockler.com/wunderfil-woo...
- Urethane Top Coat
https://www.rockler.com/general-finis...
- Liberon Wax
https://www.rockler.com/liberon-black...
- Shop towels or clean rags

Subscribe to this channel for more of the latest woodworking how-to videos and new product innovations. Click the red subscribe button at:    / rocklerwoodworking  

Find the best woodworking products and innovations at: http://www.rockler.com/