Скачать или смотреть Homemade Frame for Hand Painting Fabric

I was asked about the frames I place my fabric on when I hand paint. Making an inexpensive custom frame to stretch cotton fabric on for hand painting is easy. When fabric is set on a surface for painting it may end up with unwanted marks or bubbles. Sometimes that is okay but when I want more control over the finished fabric I use a frame. This size frame yields a usable piece of fabric that is 18" by 44" and I use the leftover selvage, that may not be completely painted and have may "teeth" holes, for other fiber artwork. Though the frame could be made any size I would recommend no larger than 4 feet by 3 feet.
Materials for making this frame are:
3/4" x 1 1/2" pine lumber
cut two pieces 18" and two pieces 45 3/8" (I bought three 48" pieces).
Picture hangers (I used 50 but fewer may be used).
Small brads or nails with heads
Hammer (I used a tack hammer)
The bolt from a toggle bolt set
8 drywall screws
Hand drill, drill bit a little smaller in diameter than the screw, and a screw driver bit
Small needle nose pliers (optional, may help hold the brad when hammering)
Wood glue (optional)
Pencil
A wine or champagne bottle cork
I have several of these frames so I can paint and set them out to dry. When the first one is dry I quickly pull the fabric off and put a new piece on... on a sunny day I can just keep painting, pop the dry fabric off and start again.
Website - http://www.fiberdesignsbyann.com
The fabric that I remove from the frame at the end of this video was made into the binding for my art quilt "Dwell" Learn more about "Dwell" on my blog - http://fiberdesignsbyann.com/blog/?p=960