Скачать или смотреть CAM-WOOD SET-5SA Double End Tenoner 4 heads

CAM-WOOD SET-5SA Double End Tenoner 4 heads
https://www.exfactory.com/DetailNew/T...

Capacity:

Length of cut: 12" to 60"
Max. width of cut: 24"
Max. clamping thickness: 4-1/2"
Saw blade dia. 8" to 12"; saw arbor dia. 1"; saw blade speed 3,400 RPM; saw head swivels 360 degrees.
Moulder (Shaper) spindle: 1" Dia. x 5" long; spindle speed 6,000 RPM; spindle swivels 360 degrees.
Vertical travel: 17"
Carriage cross travel: 24"

Equipped with:
Saw motors: (2) each 2 HP motors
Moulder spindles: (2) each 2 HP motors
Out Feed Conveyor drive: 1 HP motor
Powered length setting: 1/2 HP

Features:
With the double end miter saw set-up, you can do cut-off stock faster or consider a double end miter saw combined with moulding head. It lets you cut off stock and moulding pattern in a single feed, that saves time, space, and cost.
Air-operated clamp comes down holding sticks firmly in place. After work piece is clamped, table start to feed, performs trimming and shaping operations.
Trim saw allows to cut stock accurately with a clean cut.
Moulding (Shaper) spindle mounted at the rear of saw head enables the machine to perform edge moulding after stock is cut off.
The entire cutting cycle, cut-off, shaping/tenon or mortise is automatically operated at single pass of stock feeding.
The table travels on a precision linear motion guide for stability.
The table traverse is driven by power system, ensuring very stable, smooth workpiece feeding.
Variable feed speed permits proper feed selection for hard or soft wood materials.
Big hand wheel adjusts depth of cut.
All controls are grouped in a control panel.
Industrial motors for optimal cutting results.
Material transport thru machine powered by variable speed inverter drive for 10 to 20 seconds per cycle

Machine Stations:
1: Trim saws powered by (2) 2 HP saw arbor motors for trimming to length.
2: Shaper spindles powered by (2) 2 HP spindle motors for applying tenons and grooves.

Floor space requirement: 94" X 40" X 54" high
Cycle time: 10 to 20 second per cycle

Available option at additional cost:
Auto Outfeed device
Return conveyor