Harley Low Rider / Street Bob Passenger Peg Crash Bar Frame Slider Installation (Fits '18-'23)

The HOGWORKZ® passenger peg crash bar serves as a replacement for stock passenger pegs, positioned slightly higher. Equipped with derlin pucks at the peg ends, it prevents the bike from gripping the pavement, thus minimizing potential damage. The pegs feature a gripper style to ensure a secure foot placement for passengers.

These HOGWORKZ® passenger pegs are especially compatible with the Highway Peg crash bar, significantly reducing the risk of the bike making complete contact with the handlebars and tank. For stunt enthusiasts, these pegs prove to be a valuable addition, enhancing bike protection during low-speed stunt practice.

BUY NOW!
https://hogworkz.com/passenger-peg-cr...\
SKU: HW157190

0:00 Intro
0:40 Tools needed
1:30 Begin the installation by removing the saddlebags
1:40 Remove the left side t-45 bolt holding the saddlebag grommet
2:00 Use a pry tool to remove the plastic insert
2:30 Install the peg that has the cutout using the top bolt
3:00 Reinstall the saddlebag grommet using the lower bolt-hole
3:50 Reinstall the left saddlebag
4:10 On the right side loosen the exhaust heat shield bracket and rotate it out of the way
4:30 Remove the upper and lower 5/16th bolts
5:10 Loosen the exhaust manifold bolts
6:20 Remove the plastic insert on the right side
6:50 Install the right side peg behind the exhaust
8:10 Tighten the exhaust heat shield and manifold bolts
8:40 Reinstall the right saddle bag
8:50 outro