【TAIWAN T-N.T. STUDIO】KJ Shadow 2 / CZ75 SP-01 Retrofit Kit - Assemble Introduction

【TAIWAN T-N.T. STUDIO】
KJ Shadow 2 / CZ75 SP-01 Retrofit Kit - Assemble Introduction

KJ Shadow 2 / CZ75 SP-01 升級套件
產品介紹：
1.擺脫傳統方式，玩家們可直接透過膛座底部調整HOP-UP，無需拆解滑套即可做微調，大幅增加便利性與效率。
2. HOP座本體為一體式設計，採用合金精密鑄造，調整環為鋼製品，膠皮全包覆式的設計氣密度優秀且安裝步驟簡單快速。
3.本產品共用目前市售各品牌MARUI規格GBB膠皮與精密內管，後勤補給非常便利。
4. HOP-UP調整方式為TDC方式：可提供調整環平均的下壓力度，環狀弧形下壓接觸面，提供更好的上旋效果。
5.HOP採無段式調整，使用常規1.5mm內六角板手，可進行更細緻的微調；搭配最新設計TL膠皮，對應彈種0.12~0.32g更適合短槍、低動能或是競技專用。
6.調整環設計有回推彈簧，調整螺絲為斜角設計，維持HOP-UP不易鬆動，有效維持調整完畢後的理想下壓量。


本產品提供以下可供選購：
●HOP-UP管皮座 總成套組 (標配為TL膠皮、精密管、HOP座、內附一支內部調整工具)。
●單HOP-UP座套組 (標配為TL膠皮)。
​※220mm以下內管皆無氣墊槽設計。
​​※可對應品牌與款式：ASG KJ Shadow 2 / SP-01 / B&T USW A1
※SHADOW-2免修直上，CZ75 SP-01需要自行小修導桿擴孔才能安裝此套件，建議有DIY基本功力者再購買，或是請專業店家協助。

KJ Shadow 2 / CZ75 SP-01 GBBP dedicated One-piece TDC FULL HOP-UP RETROFIT KIT

Global innovation & Patented product!
"TDC & no need to remove pistol slide"

Feature of product:
Features of product:
1. Unlike the traditional method, players can directly adjust the HOP-UP through the bottom of the chamber without removing the pistol slide, which greatly increases convenience and efficiency.

2. The body of the HOP chamber is designed in one piece and made of alloy precision casting, and the adjustment is made of steel. The rubber-covered design has excellent air-tightness and the installation steps are simple and fast.

3. This product is shared with various brands of MARUI specification GBB rubber on the market, and it is very convenient to replenish.

4. Change the HOP-UP adjustment method to TDC: It can provide the average down force of the adjustment ring. The annular arc-shaped pressing contact surface provides better top-spin effect.

5.Adjust with a 1.5mm Allen wrench so that the HOP step-less adjustment allows for more fine-tuning; paired with the latest TL-HOP bucking, corresponding to 0.12g~0.32g BBs, suitable for GBB pistols or competitive short guns.

6.Adjustment ring is designed with a push-back spring to keep the HOP-UP not easy to loosen, and the adjustment screw is beveled, effectively maintaining the ideal amount of depression after adjustment.This product offers the following options:

Complete set (standard configuration is TL-HOP bucking, precision inner barrel, HOP chamber,includes an adjustment tool.)
Single HOP-UP chamber set (standard configuration is TL-HOP bucking)

​※Length below 220mm without air-cushion groove design.
​​※Corresponding brands and versions: ASG KJ Shadow 2 / SP-01 / B&T USW A1.
※This kit can be installed directly on SHADOW-2. The guide rod of CZ75 SP-01 needs to be reamed to install this kit. It is recommended that you must have relative DIY ability before purchasing, or ask a professional store for assistance!

-----------------------------------------------------------------------
【TAIWAN T-N.T. STUDIO】

●Official website:
http://www.taiwangaote.com/

●FaceBook :
  / tnt.studio.tw  

●Instagram : tnt_studio_airsoft
  / tnt_studio_airsoft  

●Purchase method: Please send a private message to our Facebook or contact the dealers.
🔗http://www.taiwangaote.com/sales-loca...