Скачать или смотреть How to make a custom Kydex Knife Sheath

In this video I'll be a making a custom kydex knife sheath for a fillet knife. First I will cut the pieces for the sheath, put them in an oven at 350 degrees F. for about four minutes. After the kydex is heated I place it in a kydex press, set the knife in the kydex and press it until it is cooled. Then the sheath is marked for eyelet holes, drilled and eyelets pressed. The sheath is then trimmed to size on a bandsaw, sanded to shape on a 2x72 belt grinder then the edges are buffed. Then the cam is set using a heat gun making the knife easily go in and out of the sheath. The sheath is cleaned and lightly oiled ready for use.

Song: Baddest Alive
Music by: CreatorMix.com
Video:    • Copyright Free Stomp Rock Music | Baddest ...  

Framelock building playlist: https://studio.youtube.com/playlist/P...
Knifemaking Playlist    • Knife Making  
Damascus making Playlist    • Making Damascus Steel  

(Below are affiliate links to products that I get a small fee at no extra cost to the buyer)
YesWelder welding machines https://yeswelder.com/?ref=qkvl6voq
Use CODE: TONYSEVERIO at checkout for 10% OFF!

Optical Center Punch https://amzn.to/3GSLGY6
Cratex Jeweling Stick 400-600 grit https://amzn.to/47boZcR
Barrel Lap set https://amzn.to/4eY47Gx
Digital Angle Finder https://amzn.to/3CFWJC9
#53 Carbide Drill Bit https://amzn.to/3ZbhqhW
#54 Carbide Drill Bit https://amzn.to/3Z82u4i
1/16 inch 440C ball bearings for detent https://amzn.to/3ZbiZfO
1/16 inch ceramic ball bearings for detent https://amzn.to/48UAHaI
Cutoff Wheel and Arbor https://amzn.to/4eoW0T5
5/16 Carbide Ball End Mill https://amzn.to/3AL24Hv
Optical Center Punch https://amzn.to/40vS3Z8
5/64 carbide drill https://amzn.to/3AhnagC
#44 carbide drill https://amzn.to/3YToY9b
.166 counterbore https://amzn.to/4e2hAfS
#13 (.185 inches) Carbide Drill https://amzn.to/4eVfyQ3
3/16 (.1875 inches) Carbide Reamer https://amzn.to/3UmDBPi
1/8 (.125 inches) Carbide Spotting Drill
9/64 (.14 inches) Carbide End Mill
8-9 Ounce Vegetable Tanned Leather https://amzn.to/4cBGq7j
Weldwood Contact Cement https://amzn.to/4lyhx06
Brown Leather Dye https://amzn.to/3GexsRe
Neats Foot Oil https://amzn.to/43Tgu4F
3 piece basketweave leather stamps https://amzn.to/44cQ64i
Leather stitch groover https://amzn.to/45ztTjg
Leather stitch marker https://amzn.to/4lhtxSX

Reading and Instruction:
Knife Engineering by Dr. Larrin Thomas: https://amzn.to/3SO7hlP
BUILD YOUR OWN HYDRAULIC FORGING PRESS by Dr. James Baston: https://amzn.to/3fV86L1


THANKS to my Patrons!
Eric Bethard
Dominic Kidwell
Charles Apodaca
Michael Hodges
Jeff Schafer
Mark Anderson
Allan Williams
Anderson Hand Forged
Michael Baker
Sonja Stevenson
Jeremy Green
Justin Goodman
James Buck
Jason Mulkey
Richard Branton
Robert Bryant
Bruce Brissette
Clint Hancox
Joe Dees
Steve Mowatt
Dave Perry
Dan Still
Sam Daugherty
Shane Wismeyer
Robert Gore
George C.
James Murphy
Rynn Smith

My Patreon:   / tonyseverioknives  
My Website: https://www.tonyseverioknives.com
My Instagram:   / tonyseverioknives  
My Facebook:   / tonyseverioknives  
My TikTok:   / tonyseverioknives  

#knifemaking #bladesmith