How to Replace Rear Brakes 2013-2017 Honda Accord

Buy Now!
New Brake Pads from 1AAuto.com https://trq.video/ic-1ABPS02709
New Brake Rotor Set from 1AAuto.com https://trq.video/ia-1APBR00994
New Brake Pad & Rotor Kit from 1AAuto.com https://trq.video/ib-1APBS00728

This video shows you how to install new rear brake pads and rotors from TRQ on your 2013-2017 Honda Accord. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This repair was done on a 2013 Honda Accord EX 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2013 Honda Accord
2014 Honda Accord
2015 Honda Accord
2016 Honda Accord
2017 Honda Accord

Tools you will need:
• Phillips Head Screwdriver https://trq.video/obq9-1AXAA00013
• 12mm Socket https://trq.video/obEp-1AXAA00015
• 17mm Socket https://trq.video/obEp-1AXAA00015
• 19mm Socket
• Brake Caliper Compressor Tool. Single Piston. Screw Style.
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet https://trq.video/objr-1AXAA00017
• 3/8 Inch Drive Ratchet https://trq.video/obEp-1AXAA00015
• Torque Wrench https://trq.video/oaMj-1AXAA00044
• Gloves https://trq.video/oany-1AXSS00048
• Safety Glasses
• Drain Pan
• Floor Jack https://trq.video/oaby-1AXAA00068
• Wheel Chocks
• Wire Brush https://trq.video/ot9-1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Honda Accord 2013-17 9th Gen:    • Honda Accord 2013-17 9th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.