How to Replace Blower Motor Resistor 2000-2007 Ford Focus

Buy Now!
New Blower Motor Resistor from 1AAuto.com https://trq.video/ic-1AHBR00035

This video shows you how to install a new TRQ blower motor resistor yourself in your 2000-2007 Ford Focus. The heat and air condition fan is controlled by a separate module, called the blower motor resistor. The nature of this component’s job causes it to heat up frequently, which can lead to failure. If your vents will only blow one speed, this is likely the cause. TRQ has a new resistor module made specifically for your vehicle.

This repair was done on a 2006 Ford Focus ZX4 2.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2000 Ford Focus
2001 Ford Focus
2002 Ford Focus
2003 Ford Focus
2004 Ford Focus
2005 Ford Focus
2006 Ford Focus
2007 Ford Focus

Tools you will need:
• 8mm Socket https://trq.video/obC3-1AXAA00017
• 3/8 Inch Drive Ratchet https://trq.video/ob2y-1AXAA00015
• Socket Extensions https://trq.video/ob2y-1AXAA00015
• Swivel
• Gloves https://trq.video/oaVN-1AXSS00048
• Safety Glasses

Subscribe:    / @trq  

Check out our playlist:
Ford Focus 1st Generation 2000-2007:    • Ford Focus 1st Generation 2000-2007  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.