Eastron SDM72DR: 3 Phase 100A Direct Connected Pulse Output kWh meter, Partial resettable kWh

The SDM72DR-MID is a low-cost Electricity Meter, a powerful tool for monitoring and managing your three-phase electrical usage. Ideally suited for accurate monitoring, for example, a solar panel system, charging station, heat pump, or another 3-phase group of your choice. You can immediately see how much kWh the system in question consumes. In addition, this meter has been MID approved. This means that this calibrated kWh meter may be used for official registrations and settlements of the measured data. For example, if you want to settle the electricity consumption of a specific room with a tenant. Also featuring an easy-to-read digital backlit LCD display, this device provides clear data visibility in all environments. This kWh meter can easily be read by an energy consumption manager because of the built-in Pulse (S0) output. The Eastron SDM72DR-MID is suitable for up to 100 Amps continuously. With the ability to measure active energy(kWh) and resettable Energy(kWh), this monitor helps you identify areas where energy consumption can be reduced - for maximum energy-saving potential and cost saving