Star Wars: How to Make the Skywalker Lightsaber for $25 - Easy Tutorial Part 2

Build this legendary lightsaber just in time for the Last Jedi - I'll show you how. For around $25 you can make one yourself which will light up and have sounds, react to strikes by following my easy steps.
#starwars #lightsaber #theriseofskywalker
This is Part 2 of the build.

Here's the parts list for this build:
Plumbing pipe 11/2" X 12" (chrome plated brass)
Rubber car floor mat
kid's $3 generic light saber (found at Walmart, 5 and Below)
D-ring (made out of 9 gauge wire, thinner wire will also work)
1" diameter metal ring (mine came from an old lamp post)
2 one-inch slices of Aluminum L 1"X 1/16"
2 RG 6 connectors (found part)
2 old RCA connectors with gold ends (found part)
1- 1" Sharktube/PEX pipe coupler (to receive lightsaber blade)
5 #6 1/2" bolts and nuts
6 rivets 3mm X 6mm or you could use Phillips head screws
red push button switch or 9mm dowel with red paint
Legos or you could use a 3/4" square dowel ~1.9 inches long
scrap wooden painter's stirrers
aluminum HVAC tape
1 hose clamp 12mm thick and at least 49mm or1.9" long
1 1/2 pvc coupler
1 10mm clear bumper
1 LED flashlight www.amazon.com/gp/product/B00CEOII9K
1 snap in sink hole cover
11/4" long piece of 1" Schedule 20 PVC pipe (thinner than sched 40)
1 3/16 toggle bolt
black spray paint
glue (my prferences are: DAP rapid fuse and E6000)

tools needed:
drill, drill bits
coping saw
hack saw (optional)
hand riveter (optional)
step drills (optional but very helpful)
pliers
screwdirver
files
bench vice (optional but very helpful)