MCFARLANE 66 BATMOBILE CUSTOM

2-#photography #mcfarlane #actionfigures

If you grew up in the 70's you remember this car. Mcfarlane has given us an an affordable vehicle to customize. It splits open like a clam shell, given lots of room to insert lights and a battery.

All components are from Evandesigns.com

There are 11 screw holding the vehicle . Two screws are hidden behind the from tires, so you need to remove the tires.

1-Make a silicone mold of the front headlamp grill. Dry brush the grill back on to the resin cast.

2-Custom out the from headlamp grill and turn signals

3- Custom make a headlamp out of uv resin and glue the LED to rear, paint the rear to cover light spill

4-Fill the cavity of the turn signal with orange resin and then place a casting of the texture over it. Drill from behind to insert the LED and hold in place using uv resin

5- drill the exhaust and pass the sequence lights one at time and glue down one at a time using uv resin

6 - cover the light with diffuser

7- wire the from and rear harness to the touch sensor going the LEDs
use a quick connect

8- wire the AAA holder to the touch sensor power side.
use a quick connect

9- drill a hole for the touch sensor discs to sit in


LEDS AND COMPONENTS
evandesigns.com

Amazon - resin kit
https://amzn.to/3cQTnis

CHAPTERS

00:21 PARTS LIST
01:06 DISASSEMBLE
03:20 BATTERY AND LEDS
04:48 HEADLAMPS
10:37 WIRING
13:17 EXHAUST
14:53 WIRING
16:35 PARTS LIST
17:14 FINAL VIEW




Sharing techniques to customize current action figures by painting or sculpting what is needed. Producing a figure the is either improved or just creating one from parts of other figures.



INSTAGRAM
Ink Drop Customs

FACEBOOK
  / photobella.visual  



Not sponsord by any company, all items are purchused by me and and items are created by me. Any links shared are only to share information to other creators.